 |
|
|
| FlukeView for ScopeMeter V3.0x on Windows 2000 or Windows XP |
|
Installing FlukeView for ScopeMeters V3.0x on Windows 2000 or WindowsXP.
To properly install FlukeView for ScopeMeter Version 3.0 or 3.03 on Windows 2000 or Windows XP, an updated installation procedure is required. This new installation procedure can be downloaded here.
Note: To see the version information of FlukeView, see "Help, About FlukeView ScopeMeter..."
To install FlukeView V3.0 on Windows 2000 or Windows XP, download:
English, download FV30E_W2K.EXE
French, download FV30F_W2K.EXE
German, download FV30G_W2K.EXE
To install FlukeView V3.03 on Windows 2000 or Windows XP, download:
English, download FV303E_W2K.EXE
French, download FV303F_W2K.EXE
German, download FV303G_W2K.EXE
After the successful download, follow these easy steps :
- Start the FlukeView installation from CD-ROM and select "Create Installation Disks." This procedure will create a set of 3 installation floppy disks, which are then needed for further installation
- Insert Disk #1 from the installation disks into drive A. Make certain the disk is not "write protected"!
- Run the updated installation procedure (downloaded file) for your FlukeView version. This will copy the updated installation procedure to drive A and start the installation of FlukeView software. See the printed text on the FlukeView CD-ROM label in order to determine your FlukeView software version.
|
|
|
